One of the best part of finding a knit T-shirt pattern that fits well is personalizing it. You may sew a T-shirt with stripes, solids or whatever print that you really want.
But sometimes, sewing T-shirts with the very same cut and fit can get a little boring. So why not shake issues up in an enormous way by changing the neckline? Though it might sound intimidating, changing the neckline is actually fairly easy.
We l begin right here, with a knit T-shirt that has a scoop neckline.
One in all my favorite T-shirt patterns included a bit for this scoop neck, however not one for a crew neck model. By measuring the circumference of any neck opening you design, you may create a new neckband that fits. Let have a look on the pattern piece for the entrance of the highest.
I first traced the pattern piece onto paper to make it easier to see. The blue outline exhibits the unique scoop neckline, and the purple reveals the new greater neckline.
I copied the form of the brand new neckline from an existing T-shirt to find out how much to raise it. Observe that if you e going to make changes in your knit T-shirt sample, it useful to trace the pattern pieces and then make all of your modifications on the copies, retaining your authentic sample for future use. Be at liberty to mark and measure in your copies as I’ve finished here.
Step 1: Mark the stitching traces
Once you e drawn in your new neckline, mark the stitch strains. That is the dotted line, marked on the 5/8 seam allowance. I caught with 5/8 for this instance, however you’ll be able to customize your neckline seam allowance to whatever you prefer. A slightly narrower seam allowance of 鎴垾?or 3/8 works best for most patterns.
On this T-shirt I閳ユ獡 not going to change the back neckline, but I copied that pattern piece as well.
Step 2: Measure the stitching line
Measure the length of the stitching line on the new neckline. To measure this curved line, you possibly can place your tape measure on its side as Women’s Desgin Ciclessa Short Sleeve Tee Shirt proven. If you have a flexible ruler you should use that as a substitute. Measure from the middle front to the shoulder seam. This one measures 6鎴垾?
Step three: Calculate the brand new neck opening
Here are the measurements for the neck opening: The entrance stitching line is 6鎴垾?and the again is 4鎴垾? (Even in case you don change the form of the again neckline, you still have to measure it for the calculation.)
Then, add the entrance and back measurements collectively and double that number. It doubled for the total circumference of the neckline, since we only measured half on the sample items since they are cut on the fold.
For my T-shirt, we’ve: (6鎴垾?+ 4鎴垾? = 11闄嗛垾?x 2 = 23 /h2>
Step 4: Calculate the neckband size
Now you l must do the calculation for the neckband. We would like the neckband to be a bit smaller than the neck opening, because the neckband is stretched slightly to drag the opening near the physique.
Use 7/8 of the entire circumference of the neck opening that you just found in the previous step. So, I multiplied 23 x zero.875 = 20-1/8 /p>
I chose to drop that fraction and use a remaining measurement 20 inches for the new neckband. This includes the seam allowance to affix the neckband seam.
Step 5: Cut the neckband
Minimize your new neckband to the length of your calculation and no matter width you want. You may even use the original neckband from the pattern and simply change the length.
Seam the neckband collectively as you normally would, then attach it to the neck opening. I like to seek out the middle level and pin that to the center front, put the seam at the center again and then ease the neck opening to the band on either facet. I additionally baste the neckband on to see if the match is accurate, as each knit fabric behaves in another way. Sometimes the neckband must be a bit smaller to create a snug match around the neck.
Identical sample different necklines. Now your pattern library simply obtained bigger with out storing any more patterns.